Christie 1" Air Torque Wrench Model Number: C-RAD 27A In-use data available The C-RAD 27A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 27A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 27A will automatically change to a low speed for final tightening. Compare View Product Christie 1.5" Air Torque Wrench Model Number: C-RAD 68 The C-RAD 68 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 27 In-use data available The C-RAD 27 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 46 In-use data available The C-RAD 46 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10L In-use data available The C-RAD 10L Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 1 The C-RAD 1 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 5 The C-RAD 5 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 10LNA The C-RAD 10LNA Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool with an integrated nose cone extension designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 10LNA has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 10LNA will automatically change to a low speed for final tightening. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14 The C-RAD 14 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 3/4'' Air Torque Wrench Model Number: C-RAD 14A The C-RAD 14A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 14A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 14A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 34 In-use data available The C-RAD 34 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1'' Air Torque Wrench Model Number: C-RAD 34A The C-RAD 34A Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The C-RAD 34A has an automatic two speed gearbox to allow the operator to run down a fastener up to 5 times faster than the normal operating speed. When the torque starts to increase The C-RAD 34A will automatically change to a low speed for final tightening. The reaction force works in the opposite direction to the applied torque. Compare View Product Christie 1.5'' Air Torque Wrench Model Number: C-RAD 80 The C-RAD 80 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Christie 1.5'' Air Torque Wrench Model Number: C-RAD 115 The C-RAD 115 Pneumatic Torque Wrench is a hand held, non-impacting air driven power tool designed to quickly and accurately apply torque to and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Torque is controlled by regulating air pressure via a Lubro control unit. Compare View Product Universal Air Tools 6mm Angle Industrial Die Grinder Model Number: UT5724 Heavy Duty usage with low noise and vibration levels. For metal finishing in restricted space Compare View Product Worx SD SemiAutomatic Driver Model Number: WX254.4 Worx Slide Driver is a screwdriver with a difference, designed to make your job easy! There’s always a loose screw somewhere around the house, and your screwdriver never seems to fit - until now. SD stores all the bits you need directly in the tool, so the bits never get lost and there’s no wasted time fumbling around trying to find the right bit. Plus, the 4V MaxLithium battery stays charged for up to 1 year, so your WORX SD is always ready! Compare View Product Worx Circular Saw Model Number: WX426 Worx Circular Saw Compare View Product Worx 350w Universal Oscillation Multi-Tool Model Number: WX680 Worx 350w Universal Oscillation Multi-Tool Compare View Product Huck Rivet Puller Model Number: LH-224 In-use data available The Huck® LH-224 pneudraulic installation tool is a lightweight, high-speed production tool, designed to install lockbolts such as Magna-lok®, C6L® and Magna-Grip@ up to 6.4mm (1/4”) and structural rivets up to 6.4mm (1/4”). It is simple and reliable and has been a popular tool in Australia and New Zealand for many years. The tool-head accepts a wide range of nose assemblies (sold separately) which can be quickly and easily changed to suit rivets and lockbolts from most manufacturers. Compare View Product Christie 3/4'' Battery Torque Wrench Model Number: BC-RAD 1X The BC-RAD 1X Battery Torque Wrench is a hand held, non-impacting battery driven power tool designed to apply torque to tighten and remove threaded fasteners. The reaction force works in the opposite direction to the applied torque. The point of reaction should be kept as far away as practicable from the centre of the gearbox to minimise this force. Compare View Product