Clarke Belt And Disc Sander Model Number: CS4-6D In-use data available This quality belt and disc sander is an invaluable addition to any workshop, also suitable as a linisher. Ideal for use with woods and most plastics. Compare View Product DeWalt SDS Plus Drill Model Number: D25013K-LX In-use data available This DeWalt D25013K-LX SDS Plus drill is ergonomic and easy to use without skimping on features. The impact stop mode cuts out the hammer action so you can drill through softer materials like wood or plastic. When dealing with masonry, the 650W motor can produce 1.8J of impact energy, driving holes of up to 22mm in stone. A 4m cord and multi-position side handle give you additional flexibility when moving around your workspace. Compare View Product DeWalt SDS Plus Drill Model Number: D25323K-GB In-use data available Take on drilling and hammering jobs in comfort thanks to the anti-vibration technology in this DeWalt D25323K-GB SDS Plus drill. Even with its user friendly design, there’s no compromise on power, with an 800W motor delivering 3.4J hammer impact. This power means the tool is more than capable of drilling holes and fixing anchors into concrete and masonry 4-26mm in diameter. Compare View Product Hitachi Hammer Drill Model Number: DV20V2 In-use data available Hitachi Hammer Drill Compare View Product Hitachi 7'' Angle Grinder Model Number: G18SE3 In-use data available Hitachi 7'' Angle Grinder Compare View Product Hitachi 3/8'' Reversible Drill Model Number: D10VF Hitachi 3/8'' Reversible Drill Compare View Product Hitachi SDS Plus Rotary Hammer Model Number: DH24PC3 In-use data available Hitachi SDS Plus Rotary Hammer Compare View Product Makita Dust Extractor 42L M-Class Model Number: VC4210MX/1 Wet and Dry M-Class Dust Extractor with power take-off Class M - Removes 99.9% of dust with Limit Value for occupational exposure > 0.1 mg/m³. Suitable for processes involving mica, china clay, gypsum, wood dust, such as softwood and hardwood and silica dust, such as masonry, concrete Compare View Product Makita Dust Extractor 42L M-Class Model Number: VC4210MX/2 Wet and Dry M-Class Dust Extractor with power take-off Class M - Removes 99.9% of dust with Limit Value for occupational exposure > 0.1 mg/m³. Suitable for processes involving mica, china clay, gypsum, wood dust, such as softwood and hardwood and silica dust, such as masonry, concrete. Compare View Product Makita Dust Extractor 42L M-Class Model Number: VC4210MX1/1 Wet and Dry M-Class Dust Extractor without power take-off Class M - Removes 99.9% of dust with Limit Value for occupational exposure > 0.1 mg/m³. Suitable for processes involving mica, china clay, gypsum, wood dust, such as softwood and hardwood and silica dust, such as masonry, concrete. Compare View Product Mirka Dust Extractor Model Number: Dust Extractor 1230 L PC This professional dust extractor has a high performance motor and turbine, which creates 250 mbar vacuum and 4500 l/min air flow. The AutoStart function increases the lifetime of the motor and reduces noise. Flat top with space for storage and large wheels for better maneuverability. Hose and cable storage for more comfortable transportation. A fleece dust bag is also included. The dust extractor should always be used with Mirka antistatic hoses (not included). Compare View Product Mirka Dust Extractor Model Number: Dust Extractor 1230 M AFC This professional M-class dust extractor has a high performance motor and turbine, which creates 250 mbar vacuum and 4500 l/min air flow. The AutoStart function increases the lifetime of the motor and reduces noise. Flat top with space for storage and large wheels for better maneuverability. Auto-filter cleaning for convenience and consistent performance, as well as an air-flow sensor which indicates when air flow falls below optimal. Compare View Product Red Band 14'' Bridge Saw Model Number: MB100 The MB Bridge Saw is a robust, strongly made bridge saw which has been specifically designed and developed to perform a multitude of cutting applications on a wide variety of building materials including large floor and wall tiles, roof tiles, natural stone, masonry materials, concrete slabs, blocks and similar concrete based products. The options are the MB65, MB100 and MB120 bridge saws. Compare View Product Husqvarna Core Drill Model Number: DM 220 Handheld electric core drill for both dry and wet drilling. DM 220 has an electronic positioning system for accurate drilling, making it a perfect choice when you look for a drill motor with precision and efficiency. The ergonomically designed D-handle gives you good control whilst drilling. Handheld core drilling up to 80 mm or drilling with stand up to 150 mm. Suitable for light applications such as ventilation, plumbing pipes, electrical sockets and cables. Compare View Product Husqvarna Core Drill Model Number: DM 230 Handheld electric core drill with attractive design and functional ergonomics. The motor is designed with a pistol grip giving you greater control. Handheld core drilling up to 80 mm or drilling with stand up to 150 mm. Suitable for light applications such as ventilation, plumbing pipes and electrical sockets and cables. DM 230 is an excellent choice for professionals as well as semi-professionals. Compare View Product Husqvarna Core Drill Model Number: DM 340 An easy to operate drill motor from Husqvarna. The DM 340 features an ergonomic handle that makes it easy to carry around. The controls are designed and positioned to further enhance ergonomics and to facilitate drilling and set up. The DM 340 is designed for medium core drilling up to Ø 400 mm together with Husqvarna drill stands. The machine has three gear stages, so the operator can find the optimal drilling speed. Compare View Product Biemmedu Floor Scrubber Polisher Model Number: MS 17 In-use data available For the professional cleaning, washing, scrubbing, polishing and waxing of all kinds of floors. Compare View Product Husqvarna Floor Grinder Model Number: PG 280 In-use data available PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas. It is available in both 1- and 3-phase versions. Designed to facilitate an ergonomic work position, it is easy and convenient to use. The machine is light and compact and therefore easy to transport and set-up. Compare View Product SPE Floor Grinder Model Number: DFG 400-2 In-use data available The DFG 400 Floor Grinder has been developed to meet the competitive demands of the general floor grinding marketplace. Compare View Product SPE 110v Floor Planer Model Number: BEF 200-1 Used for a multitude of applications including the cleaning and texturing of concrete and asphalt. Compare View Product